We always have these and various other complications when we put up our picture. Specifically the friend that a great deal of wish to stay wallpapers of oneself begin work, it is definitely to adhere to one’s inclinations even more, discovered to stay finally just always experienced a few small imperfection.
In fact, as lengthy as construction attention, these problems can be avoided. Today, discussing pick out all these complications and concentrate on resolving 
them!
Basal membrane peeling
1) before cleaning the bottom film, check whether the wall structure is standard, zero powdering and no floating level.
2) whether there are minor breaks in the wall.
3) whether the building temperature is over 5 levels.
4) if the initial brush is too thick, brush the second one before drying. The Vinyl Wall paper drying out time of the internal and outer layers may cause peeling.
5) whether the base film is usually too heavy, drinking water can be added for relief. Brush the base film once again after sanding with sandpaper.
The treatment of substrate film has great influence on the wallpaper effect, and the most immediate effect is on the stability of the wallpaper. Therefore, the substrate membrane must end up being treated according to the requirements of the instructions and mixed with the actual circumstance.
The glue overflow
Glue overflow is a very common phenomenon in the process of pasting wallpaper, in the construction procedure, we should try our best to avoid the overflow of glue through paper record, the paper picture is relatively easy to clean, may not make use of paper cassette, all the wallpaper other than the paper cassette suggested to use paper record building.
1) wipe with a damp cloth or sponge, suitable for scrubbing up wallpaper.
2) absorbent with dry towel, ideal for wallpapers whose surface area may not be touched with water.
3) absorbent with a damp sponge, suitable for wallpapers with granular surface area.
Blot in foundation joint
The treatment of wallpaper joint is the key web page link of wallpaper construction all the time, a lot of professional construction masters have got their own tricks. For the layman, in the building of particular attention. When adhering wallpaper, glue did not come out totally, accumulate at point, time is definitely very long glue and wallpapers rise reaction.
Alternative: take a little container of 60-80 degree boiled water and put a container of white colored vinegar to it. When the water cools, rinse it at the joint. (local check is recommended) the wallpapers will be more effective in 1-2 months, and 80% traces can be removed.
The wallpaper shrinks and warps
Wallpapers contraction phenomenon is mainly the employees in the building of loose joints, resulting in a later period of this problem, and workers with the construction technology. Because wallpapers can be made by wood pulp, possess the quality of lumber damp bilge dried out shrink, functionality is definitely not really particularly stable, after going up glue liquid can have particular dilatancy, create systole in drying out process. Although the enlargement can not really end up being managed, workers can control the contraction during construction.
Many picture contractions are undetectable, unless the seams are insufficient. In this case, it is generally feasible to hold overlapping parts at joint parts. Usually, 1-3 cm of overlapping parts at bones are better.
If you have already contracted, the fix process is relatively simple. Dip the joint for 10 mins with a damp bath towel and pick up the wallpapers with the tip of the wallpaper knife. If the attachment of the picture surface is metallic surface, scraping very easily makes the wallpaper surface area shed shine and switch dark, damage the picture surface area beautiful, it can be not really suggested to operate.
The wallpaper moldy
1) the wallpapers is moldy and usually has spots on the wallpapers surface area.
(1) water seepage should be checked.
(2) whether the glue is completely dry.
(3) whether there is water and surroundings in the wallpapers for a long time, which will trigger mildew when it all reacts with glue.
(4) high humidity.
(5) wet wallpaper paste.
Mold of picture is the problem that the person that sticks wallpaper worries, also end up being to appear after solve difficulty coefficient one of the biggest problems, accordingly, this kind of issue, want with prevent provide priority to. It is normally best to prevent wet and wet function in progress.
Therefore, after picture appears this sort of issue, do not really have answer? Of program not really.
2) treatment method
(1) the mildew stage is little. It can be recommended to wipe it with fertilizer or detergent and dry it with a locks clothes dryer.
(2) with bleach, it all is simple to irritate the epidermis and might cause the wallpapers to lose color. It is certainly not really recommended to make use of.
(3) if the mildew point is usually huge, the wallpapers should end up being replaced. If the water seepage can be caused by the wall structure, this issue should end up being solved completely before Posting.